152 1-800-526-2324 ? www.us.tdk-lambda.com/lp/ disclaimer: us.tdk-lambda.com/lp/legal.htm zup series features u constant voltage / constant current u last setting memory u digital meters u built-in rs232 & rs485 interface w/ gpib optional u bench or rack mount u embedded microprocessor controller u voltage up to 120v, current up to 132a zero up programmable power supplies notes: (1) recovery to within +/-50mv after load change of 50-100% (2) over 8 hour period following 30 minute warm up time (3) 25c ambient (cold start) model zup6 zup10 zup20 zup36 zup60 zup80 zup120 load regulation - 2mv + 0.005% over 0 - 100% load change line regulation - 1mv + 0.005% over 85 - 132 or 170 - 265vac line change recovery time (1) ms 1ms 0.5ms 0.2ms temperature coef? cient - 30ppm/c following 30 minute warm up temperature drift(2) - 0.01% + 2mv change in output up programming response time ms 50 - 60ms 80ms 120ms down prog. resp. time (cv) ms 50ms (70ms zup60-14) down prog. resp. time (cv) ms 250ms 350ms 400ms 500ms 750ms 600ms 800ms load regulation - 0.01% + 5ma on 200w and 400w models, 0.07% + 10ma on 800w models line regulation - 0.01% + 2ma on 200w and 400w models, 0.01% + 5ma on 800w models temperature coef? cient - 100ppm/c from rated current after 30 minute warm up time temperature drift(2) - 0.02% + 5ma, 200w and 400w models, 0.05% + 10ma 800w models prog voltage resolution - better than 0.028% of rated voltage prog voltage accuracy mv .02%+5mv .02%+8mv .02%+12mv .02%+20mv .02%+35mv .02%+50mv .02%+70mv prog current resolution - better than 0.03% of rated voltage prog current accuracy - 0.4% + 40ma overvoltage shutdown v 0 - 7.5 0 - 13 0 - 24 0 - 40 0 - 66 0 - 88 0 - 132 thermal protection - over temperature protected display - voltage - 3 digits (6, 20, 36, 60, 80v models), 3.5 digits (10, 120v models). accuracy 0.2% 2 digits display - current - 3 digits, (3.5 digits 132a model). accuracy 0.5% 3 digits display - status - cv / cc, alarm, foldback, local/remote, on/off remote on/off - ttl signal or dry contact relay output good - open collector voltage & current programming - by either voltage (0-4v) or resistance (0-4k) remote sense - up to 0.5v compensation per output cable communication interface - rs232 & rs485 standard, ieee488 optional series & parallel operation - series: up to two units; parallel: up to ? ve units in master-slave con? guration ac input voltage range vac 85-265vac (47-63hz) inrush current (100/200vac)(3) a 15/30a, 200w models, 15a, 400w models, 30a, 800w models hold up time (typ) at 100vac ms 20 power factor correction - complies with en61000-3 class a (0.99 typ) temperature range - operating: 0 - 50c; storage: -20 to +70c humidity (non condensing) - operating: 30 - 90% rh, storage 10 - 95%rh cooling - internal fan withstand voltage - input to ground 2kvac, input to output 3kvac, output to ground 500vac for 1 min. isolation resistance - >100m at 25c & 70%rh vibration & shock (non-op.) - vibration:10-55hz(1 min.) 2g constant x, y, z, when correctly mounted; shock: <20g safety agency approvals - ul3111-1, en61010-1, ce mark conducted & radiated emi - en55022-b conducted, a radiated, fcc class b con ducted, a radiated, vcci-2 conducted, -1 radiated warranty yrs three years speci? cations key market segments & applications
153 1-800-526-2324 ? www.us.tdk-lambda.com/lp/ revision a6: may 2012 zup series for additional information, please visit us.tdk-lambda.com/lp/products/zup.htm outline drawing 200/400w outline drawing 800w voltage current ripple noise ripple ef? ciency adjust adjust max 5hz-1mhz 20mhz bw 5hz-1mhz % weight model range range power mv mv ma (100/200vac) kg zup6-33/u 0-6 0-33 198 5 50 50 69 / 72 2.9 zup6-66/u 0-6 0-66 396 5 50 100 74 / 77 3.2 zup6-132/u 0-6 0-132 792 8 100 200 74 / 77 5.8 zup10-20/u 0-10 0-20 200 5 50 25 73 / 77 2.9 zup10-40/u 0-10 0-40 400 5 50 50 79 / 82 3.2 zup10-80/u 0-10 0-80 800 8 90 100 77 / 81 5.8 zup20-10/u 0-20 0-10 200 5 50 15 74 / 78 2.9 zup20-20/u 0-20 0-20 400 5 50 30 79 / 83 3.2 zup20-40/u 0-20 0-40 800 5 80 60 79 / 82 5.8 zup36-6/u 0-36 0-6 216 5 50 7.5 76 / 80 2.9 zup36-12/u 0-36 0-12 432 5 50 15 80 / 84 3.2 zup36-24/u 0-36 0-24 864 5 70 30 80 / 84 5.8 zup60-3.5/u 0-60 0-3.5 210 5 50 5 75 / 79 2.9 zup60-7/u 0-60 0-7 420 5 50 10 80 / 84 3.2 zup60-14/u 0-60 0-14 840 5 60 20 80 / 84 5.8 zup80-2.5/u 0-80 0-2.5 200 30 80 5 77 / 82 2.9 zup80-5/u 0-80 0-5 400 30 80 10 83 / 87 3.2 zup120-1.8/u 0-120 0-1.8 216 30 80 5 77 / 82 2.9 zup120-3.6/u 0-120 0-3.6 432 30 80 10 83 / 87 3.2 model selector option model suf? x part number front panel terminals (20a max) 5 /l 4 zup200/400/l 4 front panel terminals (20a max) 6 /l 4 zup800/l 4 iec320 cable usa plug /u zup/u serial link cable rj-45 /w zup/w gpib controller gp485a* dual unit assembly nl200* (accepts 200w or 400w models) 19 3u rack (accepts up to 6 200/400w models) nl10 0* blanking panels for nl100 (19 in. rack) nl101* rs232 communications cable db-9 zup/nc401 rs232 communications cable db-25 zup/nc403 rs485 communications cable db-9 zup/nc402 rs485 communications cable db-25 zup/nc404 user manual nl102 * (see website for more details) 4 not available with zup80 or zup120 models. 5 200w and 400w models 6 800w models options & accessories
|